Vista normal Vista MARC

Proceso Fenton para lixiviados pretratados biológicamente

Tipo de material: Artículo
 impreso(a) 
 
  y electrónico  
  Artículo impreso(a) y electrónico Idioma: Español Tema(s) en español: Recurso en línea: Formatos físicos adicionales disponibles:
  • Disponible en línea
En: Lacandonia Año 10, volumen 10, número 2 (julio-diciembre de 2016), páginas 61-68Nota de acceso: Acceso en línea sin restricciones Resumen:
Español

Los lixiviados son líquidos altamente contaminados y difíciles de tratar. En este trabajo se presenta la aplicación del proceso Fenton para el tratamiento de lixiviados provenientes del relleno sanitario de Tuxtla Gutiérrez, Chiapas, los cuales fueron previamente tratados por un biorreactor semiaeróbico. Las variables ensayadas para el proceso fueron el pH (2.5, 3.5 y 4.5) y relaciones molares [H2O2]/[Fe+2] (2, 3 y 4). El mejor tratamiento para una hora de reacción fue obtenido bajo las condiciones de pH 3.5 y relación molar [H2O2]/[Fe+2] de 2, donde se alcanzaron remociones por arriba del 50% para DQO y más del 90% para color. De acuerdo al análisis estadístico (ANOVA) de los resultados, no se observaron diferencias significativas en una relación molar de 2 y pH de 4.5, siendo este último el más recomendable por requerir un menor consumo de reactivos ante un posible escalamiento.

Inglés

The landfill leachate is a liquid highly contaminated and difficult to treat. This paper present the application of Fenton process for the treatment of leachate from the landfill in Tuxtla Gutierrez, Chiapas; which they were pretreated for semi-aerobic bioreactor. The process variables were tested for pH (2.5, 3.5 and 4.5) and molar ratios [H2O2]/[Fe+2] (2, 3 and 4). The best treatment for one hour of reaction was obtained under the conditions of pH 3.5 and molar ratio [H2O2]/[Fe+2] 2, where removals were reached above 50% for COD and 90% for color. According to statistical analysis (ANOVA) of the results, no significant differences were observed in a molar ratio of 2 and pH 4.5, the latter being the most recommended by requiring lower consumption of reagents to a possible escalation.

Número de sistema: 58753
Etiquetas de esta biblioteca: No hay etiquetas de esta biblioteca para este título. Ingresar para agregar etiquetas.
Valoración
    Valoración media: 0.0 (0 votos)
Existencias
Tipo de ítem Biblioteca actual Colección Info Vol Estado Código de barras
Artículos Biblioteca Electrónica Recursos en línea (RE) FROSUR Recurso digital ECO400587535883
Artículos Biblioteca San Cristóbal Artículos Chiapas Hemeroteca (AR CH H) FROSUR 001 Disponible 530301C58753-10

Acceso en línea sin restricciones

Los lixiviados son líquidos altamente contaminados y difíciles de tratar. En este trabajo se presenta la aplicación del proceso Fenton para el tratamiento de lixiviados provenientes del relleno sanitario de Tuxtla Gutiérrez, Chiapas, los cuales fueron previamente tratados por un biorreactor semiaeróbico. Las variables ensayadas para el proceso fueron el pH (2.5, 3.5 y 4.5) y relaciones molares [H2O2]/[Fe+2] (2, 3 y 4). El mejor tratamiento para una hora de reacción fue obtenido bajo las condiciones de pH 3.5 y relación molar [H2O2]/[Fe+2] de 2, donde se alcanzaron remociones por arriba del 50% para DQO y más del 90% para color. De acuerdo al análisis estadístico (ANOVA) de los resultados, no se observaron diferencias significativas en una relación molar de 2 y pH de 4.5, siendo este último el más recomendable por requerir un menor consumo de reactivos ante un posible escalamiento. Español

The landfill leachate is a liquid highly contaminated and difficult to treat. This paper present the application of Fenton process for the treatment of leachate from the landfill in Tuxtla Gutierrez, Chiapas; which they were pretreated for semi-aerobic bioreactor. The process variables were tested for pH (2.5, 3.5 and 4.5) and molar ratios [H2O2]/[Fe+2] (2, 3 and 4). The best treatment for one hour of reaction was obtained under the conditions of pH 3.5 and molar ratio [H2O2]/[Fe+2] 2, where removals were reached above 50% for COD and 90% for color. According to statistical analysis (ANOVA) of the results, no significant differences were observed in a molar ratio of 2 and pH 4.5, the latter being the most recommended by requiring lower consumption of reagents to a possible escalation. Inglés

Disponible en línea

Adobe Acrobat profesional 6.0 o superior